BRODIX TRACK1 SERIES CYLINDER HEADS/23 1000000-1000001

Regular price $ 2,665.99

CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

The BRODIX Track 1® has a 221 cc intake port and a 67 cc combustion chamber. This head was designed for the drag or oval track racer who wants a lighter weight cylinder head that can make a significant difference in horsepower. The BRODIX Track 1 ® has a very thick deck that is compatible with nitrous, and comes with phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. *The spring pockets must not be cut any larger or deeper than 1.550. The BRODIX Track 1X was designed as the next step above the Track 1. An additional 20 to 25 horsepower may be gained with this head out of the box over the traditional Track 1. BRODIX has incorporated improvements such as a 40/60 valve spacing, CNC machined combustion chambers, 2.100 intake valves, and new intake and exhaust ports. The 222 cc intake port flows over 285 cfm at 700 lift. The exhaust port flows over 195 cfm at 700 lift. *Track 1X requires a T&D Economy or Jesel shaft system.
The BRODIX Track 1® is also available completely CNC ported at an economical price. CNC porting ensures maximum consistency between each intake and exhaust port. No special components are required with the CNC ported BRODIX Track 1® head. This head is available in three intake port volumes. Exhaust ports accommodate a standard Chevy pattern only. The industry standard has been taken to the next level with modernized CNC porting. Optional LT1 Modifications Available.

Package Heads:

• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO FP 1206 • PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.080 X 4.965 o.a.l. - BR 81019 (TRACK 1, STS T1 215,
KC T1 227) 2.100 X 4.965 o.a.l. - BR 81011 (TRACK 1X) 2.125 X 5.065 o.a.l. - BR 60025 (STS T1 233) • Exhaust Valves: 1.600 X 4.965 o.a.l. - BR 81021 (TRACK 1, STS T1 215, KC T1 227)
1.600 X 5.065 o.a.l. - BR 60030 (STS T1 233) • Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT
• Retainers: 1.550 10° STEEL - CC 752 (TRACK 1) 1.550 10° TITANIUM - MA 2398BR (TRACK 1X, CNC TRACK 1) • Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: 7/16 - BR 716L, AR RRS-4I • Guide Plates: 5/16 - CC 4808 (TRACK 1, STS T1 215, KC T1 2275/16 - BR 5160 (STS T1 233)• Valve Seals: 11/32 - US VS529V

FACTS AND RELATED COMPONENTS:

• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: FEL-PRO 1206, COMETIC C5414 • Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403 • Exhaust Gaskets: FEL-PRO 1406, COMETIC C5415 • Head Bolts: ARP 134-3601, MANLEY 42313 • Head Bolt Washers: MANLEY 42102 • Head Studs: ARP 234-4301(12 pt)
• Accessory Bolt Holes Are Drilled • Spark Plug Starting Points: NGK R5671A-9 FOR ALCOHOL NGK R5671A-8 FOR RACING GAS • Spring Pockets: MAY NOT BE CUT ANY LARGER OR DEEPER THAN 1.550 • Valve Angle: 23° • Angle Milling: .0078 in PER cc • Flat Milling: .0060 in PER cc • Angle Machining: NOT AVAILABLE • Dowel Shift: NOT AVAILABLE • Pushrod Slots: STANDARD (TRACK 1, STS T1 215, KC T1 227) 40/60 (TRACK 1X, STS T1 233)) • Stud Girdle: BR 6435 (TRACK 1, STS T1 215, KC T1 227) N/A (TRACK 1X) BR 6440 (STS T1 233) • Rocker Arms: STANDARD (TRACK 1, CNC TRACK 1) T&D ECONOMY OR JESEL SHAFT SYSTEM (TRACK 1, STS T1 215, KC T1 227) - T&D 2256, JESEL KPS 01001 T&D ECONOMY 40/60 OR JESEL 40/60 SHAFT SYSTEM (TRACK 1X, STS T1 233) - T&D 2256, JESEL KPS 01302• Lifters: STANDARD

Cylinder Head Specifications:

INTAKE CHAMBER VALVE SIZES PLUG EXHAUST VALVE INTAKE

PORT VOLUME INT./EXH. ANGLE PATTERN CENTERLINE MANIFOLD

TRACK 1 221 cc 67 cc 2.080/1.600 Angle Standard Standard HV 1000 / HV 1002 / SE 100 / SE 102
TRACK 1X 222 cc 68 cc 2.100/1.600 Angle Standard 40/60 HV 1000 Series
STS T1 215 215 cc 68 cc 2.080/1.600 Angle Standard Standard HV 1000 / HV 1002 / SE 100 / SE 102
KC T1 227 227 cc 68 cc 2.080/1.600 Angle Standard Standard HV 1000 / HV 1002 / SE 100 / SE 102
STS T1 233 233 cc 68 cc 2.125/1.600 Angle Standard 40/60 HV 1000 / HV 1002 / SE 100 / SE 102

CUBIC INCH COMPRESSION CAMSHAFT RPM APPLICATION

TRACK 1 350 - 406 11.5 Minimum Flat Tappet / Roller 3500 - 7000 Oval Track / Drag Race / Pro Street
TRACK 1X 350 - 430 11.5 Minimum Flat Tappet / Roller 3500 - 7000 Oval Track / Bracket Race / Pro Street
STS T1 215 350 - 406 11.5 Minimum Flat Tappet / Roller 3500 - 7000 Oval Track / Drag Race / Pro Street
KC T1 227 383 - 430 12.5 Minimum Roller 4000 - 7500 Oval Track / Drag Race
STS T1 233 383 - 430 12.5 Minimum Roller 4000 - 7500 Oval Track / Drag Race

Flow Chart CFM @ 28" H20

VALVE SIZE 0.200 0.300 0.400 0.500 0.600 0.650 0.700

TRACK 1 2.080 INTAKE 124 179 228 264 276 278 279
1.600 EXHAUST 103 138 164 178 186 188 190
TRACK 1X 2.100 INTAKE 152 213 262 285 287 290 292
1.600 EXHAUST 113 152 173 185 192 194 195
STS T1215 2.080 INTAKE 150 213 258 285 303 305 305
(CNC Ported) 1.600 EXHAUST 116 150 185 208 219 224 227
KC T1 227 2.080 INTAKE 154 223 270 303 312 314 316
(CNC Ported) 1.600 EXHAUST 116 150 185 208 219 224 227
STS T1 233 2.125 INTAKE 139 200 254 296 319 325 326
(50 Valve Job)

(CNC Ported) 1.600 EXHAUST 106 145 181 209 224 228 233

(45 valve Job)

Basic easy order numbers:

• T1 STD Bare Angle 1000000 221/67cc MAKE OFFER PER 2

• T1 STD Bare Straight 1000001 221/67cc MAKE OFFER PER 2

Free shipping 48 states
Layaway terms available
No one sells BRODIX for less.
We handle the complete BRODIX line.
We are open from 9:00 AM to 10:00 PM.

CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER

After purchasing, pay instantly with your credit card through PayPal!

Warning: May cause cancer and reproductive harm.