CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
The introduction of the PB 5000 series heads blows the 5.0 bore spacing market wide open.
These all new masterpieces are by far the most user-friendly heads in their class. These
heads offer several features that include: 15º valve angle, raised oval-shaped intake ports, and
specially designed combustion chambers that are nitrous-friendly. The standard features are
copper valve seats, phosphorous bronze valve guides, and A-356 virgin aluminum alloy. These
heads are machined to accept 1.740 spring cups and are to be used with sheet metal intake
manifolds only.
Package Heads:
• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 5010
• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.520 X 6.900 o.a.l. - 55° SEAT ANGLE
• Exhaust Valves: 1.860 X 6.820 o.a.l. - 55° SEAT ANGLE• Valve Springs: 1.650 ROLLER VALVE SPRING - MA 221448, 350 lb
CLOSED, 890 lb OPEN, 2.150 INSTALLEDHEIGHT, .900 MAXIMUM LIFT• Retainers: 1.645 10° TITANIUM - MA 2001
• Valve Locks: 10° JUMBO - CC 611• Rocker Studs: SHAFT SYSTEM REQUIRED• Valve Seals: 11/32 - US VS485V
Facts And Related Components:
• Torque Heads: 70 ft-lb• Torque Rocker Studs: 40-45 ft-lb• Intake Gaskets: BRODIX MG 5010, FEL-PRO 1223 (.030 - .120 THICK)
• Head Gaskets: FEL-PRO 26465, FEL-PRO 26466, OR FEL-PRO 26467(.041 OR .053 THICK)• Exhaust Gaskets: BRODIX MG 5020, FEL-PRO 1428
• Valve Cover Gaskets: BRODIX MG 5000, FEL-PRO 1696• Head Studs: AVAILABLE EXCLUSIVELY FROM BRODIX -SK HS PB 5000
• Accessory Bolt Holes Are Not Drilled• Spark Plug Starting Points: NGK R5671A-10 FOR ALCOHOL NGK R5671A-9 FOR RACING GAS
• Spring Pockets: MAY NOT BE CUT ANY LARGER OR DEEPER THAN 1.750• Valve Angle: 15° AND 4° INTAKE, 6° AND 4° EXHAUST
• Angle Milling: NOT AVAILABLE• Flat Milling: .0055 in PER cc• Angle Machining: NOT AVAILABLE• Dowel Shift: NOT AVAILABLE
• Pushrod Slots: STANDARD• Rocker Arms: SHAFT SYSTEM - T&D 3075, JESEL KPS 319132• Lifters: STANDARD• Pistons: 15° X 6° VALVE ANGLE
• Pushrods: CHECK PUSHROD CLEARANCE WITH HEADINSTALLED ON THE ENGINE BLOCK BEFOREFINAL ASSEMBLY
Cylinder Head Specification:
INTAKE CHAMBER VALVE SIZES EXHAUST BORE INTAKE
PORT VOLUME INT./EXH. PATTERN SIZE MANIFOLD
BP PB 5000 515 cc 80 cc 2.520/1.860 PB 5000 4.750 Only Custom Sheet Metal / PM 1950*
BP PB 5001 515 cc 80 cc 2.520/1.860 PB 5000 4.675 - 4.750 Custom Sheet Metal / PM 1950*
PB 5002 509 cc 80 cc 2.520/1.860 PB 5000 4.675 - 4.750 Custom Sheet Metal / PM 1950*
* MUST BE USED WITH INTAKE MANIFOLD ADAPTER KIT
Cylinder Head Recommendations:
CUBIC INCH COMPRESSION CAMSHAFT RPM APPLICATION
BP PB 5000 632 Minimum 14.0 Minimum Roller 4500 - 8000 Drag / Truck Puller
BP PB 5001 632 Minimum 14.0 Minimum Roller 4500 - 8000 Drag / Truck Puller
PB 5002 632 Minimum 14.0 Minimum Roller 4500 - 8000 Drag / Truck Puller
Flow Chart CFM @ 28" H20
VALVE SIZE 0.200 0.300 0.400 0.500 0.600 0.700 0.800 0.900
BP PB 5000 2.520 INTAKE 154 237 323 398 461 506 539 557
(CNC Ported) 1.860 EXHAUST 116 172 219 263 297 330 351 364
BP PB 5001 2.520 INTAKE 156 245 338 415 471 511 545 566
(CNC Ported) 1.860 EXHAUST 119 169 217 261 301 343 367 382
PB 5002 2.520 INTAKE 148 242 335 406 464 505 535 546
1.860 EXHAUST 113 167 217 254 316 348 353 359
• BP PB 5000 Pkg 2158100 MAKE OFFER PER 1
• BP PB 5001 Pkg 2158101 MAKE OFFER PER 1
-
Free shipping 48 states
-
Layaway terms available
-
No one sells BRODIX for less.
-
We handle the complete BRODIX line.
-
We are open from 9:00 AM to 10:00 PM.
CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER
| After purchasing, pay instantly with your credit card through PayPal! |
   
|
Warning: May cause cancer and reproductive harm.
