BRODIX -18X SERIES CYLINDER HEADS/18 1180001

Regular price $ 1,809.08

CALL SHANON AT 507 445 3235 FOR ANY QUESTIONS.

The BRODIX 18X offers the best of both worlds, 18° horsepower without using expensive shaft rockers or offset lifters. This head offers a dramatic horsepower increase over the previous 23° cylinder head. Several advantages of the 18X are intake ports that flow over 320 cfm out of the box, an intake valve size of 2.140, raised intake ports, and shallow combustion chambers. The 18X is an excellent choice for the budget-minded racer who wants to go fast.

Package Heads:

• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO BRODIX MG 1800 • PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.140 X 5.290 o.a.l. - BR 81050• Exhaust Valves: 1.600 X 5.300 o.a.l. - BR 81051• Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT • Retainers: 1.550 10° TITANIUM - MA 2398BR • Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: 7/16 - BR 716L, AR RRS-4I • Guide Plates: 5/16 - BR 5160 • Valve Seals: 11/32 - US VS529V

Facts And Related Components:

• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: BRODIX MG 1800, COMETIC C3250 • Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403• Exhaust Gaskets: STANDARD - FEL-PRO 1406, COMETIC C5415 SPREAD PORT - BRODIX MG 52464 (TRIM TO FIT), COMETIC C5424  • Head Studs: ARP 234-4727 (12 pt WITH 3/8 CENTER STUDS)• Accessory Bolt Holes Are Drilled • Spark Plug Starting Points: NGK R5671A-9 FOR ALCOHOL NGK R5671A-8 FOR RACING GAS • Spring Pockets: 1.550 OUT OF THE BOX, MAY BE CUT TO 1.625 - NO LARGER OR DEEPER • Valve Angle: 18°• Angle Milling: .0065 in PER cc • Flat Milling: .0055 in PER cc • Angle Machining: NOT AVAILABLE • Pushrod Slots: 40/60 • Stud Girdle: 40/60 - BR 6440 • Rocker Arms: STANDARD 7/16 ROLLER ROCKERS OR SHAFT SYSTEM WITH 40/60 SPACING • Lifters: STANDARD • Pistons: SPECIAL 18° • Pushrods: SPECIAL LENGTH • Intake Face Angle: BRODIX 10° STANDARD

Cylinder Head Specifications:

INTAKE PORT CHAMBER VOLUME VALVE SIZES INTAKE/EXHAUST EXHAUST PATTERN VALVE CENTERLINE INTAKE MANIFOLD

18 STD X         244 cc          68 cc         2.140/1.600           Angle           Standard           40/60 HV 1800 / HV 1801

18 SP X            244 cc          68 cc         2.140/1.600           Angle           Spread Port      40/60 HV 1800 / HV 1801

STS 18 STD X  254 cc          68 cc          2.140/1.600           Angle          Standard           40/60 HV 1800 / HV 1801

STS 18 SP X     254 cc          68 cc          2.140/1.600           Angle          Spread Port      40/60 HV 1800 / HV 1801

Cylinder Head Recommendations:

                CUBIC INCH         COMPRESSION       CAMSHAFT            RPM                                        APPLICATION

18 STD X         358 - 430        13.5 Minimum         Roller        4000 - 7500        Oval Track / Drag Race / Pro Street

18 SP X            358 - 430        13.5 Minimum         Roller        4000 - 7500       Oval Track / Drag Race / Pro Street

STS 18 STD X  358 - 430        13.5 Minimum         Roller         4000 - 7500      Oval Track / Drag Race / Pro Street

STS 18 SP X     358 - 430        13.5 Minimum         Roller         4000 - 7500      Oval Track / Drag Race / Pro Street

Flow Chart CFM @ 28" H20

                              VALVE SIZE                      0.200             0.300             0.400             0.500             0.600            0.650            0.700

18 STD X           2.140 INTAKE         157             212            260             303            319           321            325

                         1.600 EXHAUST      106            145            179            195            205          209            211

18 SP X             2.140 INTAKE          157             212            260             303            319           321            325

                         1.600 EXHAUST      122            164            200            217            226          230            233

STS 18 STD X   2.140 INTAKE          145             214             261            303            328           331            336

(CNC Ported)   1.600 EXHAUST        110             154             206            224            231           234            237

STS 18 SP X      2.140 INTAKE          145             214             261            303            328            331           336

(CNC Ported)   1.600 EXHAUST        119             158             196            232            243            247           250

 

BASIC EASY ORDER NUMBER:

• 18 STD X Bare Standard Exhaust 1180001 MAKE OFFER PER 2

  • Layaway terms available

  • Free shipping in the lower 48 states!

  • We handle the complete BRODIX line.

  • We are open from 9:00 AM to 10:00 PM.

  • WE CAN BEAT ANY PRICE ON BRODIX.

    CALL SHANON AT 507 445 3235 FOR ANY QUESTIONS.
    CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER

    After purchasing, pay instantly with your credit card through PayPal!
     
    VisaMasterCardDiscoverAmerican Express

    Warning: May cause cancer and reproductive harm.