BRODIX -18c SERIES CYLINDER HEADS/18 1188105

Regular price $ 15,550.43

CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

The BRODIX 18 C cylinder head has an 18° valve angle that works well on dirt late model or
serious drag racing applications. This head has special valve centerlines and dowel location
requiring special components. Interlocking valve seats are installed along with replaceable
phosphorous bronze guides. The combustion chambers may be angle machined down to the
mid 40 cc range without weakening the deck surface. The 18 C has two exhaust bolt patterns
available and a 5° intake face requiring a special intake manifold and components

Package Heads:

• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO FP 1282 • PS Valve Job: COMPETITION VALVE JOB
• Intake Valves: 2.180 X 5.540 o.a.l. - BR 60518D • Exhaust Valves: 1.625 X 5.540 o.a.l. - BR 60154 • Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT • Retainers: 1.550 10° TITANIUM - MA 2398BR • Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: SHAFT SYSTEM REQUIRED• Valve Seals: 11/32 - US VS529V.

FACTS AND RELATED COMPONENTS:

• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: MODIFIED FEL-PRO 1282
• Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403 • Exhaust Gaskets: SPREAD PORT - BRODIX MG 52464 (TRIM TO FIT), COMETIC C5424 • Head Studs: ARP 234-4727 (12 pt WITH 3/8 CENTER STUDS) • Accessory Bolt Holes Are Drilled
• Spark Plug Starting Points: NGK R5671A-10 FOR ALCOHOL NGK R5671A-9 FOR RACING GAS
• Spring Pockets: 1.550 OUT OF THE BOX, MAY BE CUT TO 1.625 - NO LARGER OR DEEPER
• Valve Angle: 18° • Angle Milling: .0065 in PER cc • Flat Milling: .0055 in PER cc • Angle Machining: NOT AVAILABLE • Pushrod Slots: 58/107 • Stud Girdle: NOT AVAILABLE
• Rocker Arms: SHAFT SYSTEM WITH 58/107 SPACING, CHECK HEADS FOR INTAKE OFFSET - T&D 2229, JESEL KPS 15409 • Lifters: .180 OFFSET • Pistons: SPECIAL 18°• Pushrods: SPECIAL LENGTH • Intake Face Angle: 5° A-356 Virgin Aluminum; Easily Repaired 5° Intake Flange Available
CNC Ported 18° Standard or Spread Port Exhaust 58/107 Valve Spacing Flows Over 390 cfm CNC
Ported 1

Cylinder Head Specifications:

INTAKE PORT CHAMBER VOLUME VALVE SIZES INTAKE/EXHAUST EXHAUST PATTERN VALVE CENTERLINE INTAKE MANIFOLD

18 SP C                185cc       40 cc   2.180/1.625    Angle    Spread Port      58/107     HV 1813 / HV 1814
18 STD C              185cc      40 cc    2.180/1.625   Angle    18° Standard     58/107     HV 1813 / HV 1814
WP 18 SP C*         254cc      56 cc   2.180/1.625   Angle    Spread Port      58/107     HV 1813 / HV 1814
KC 18 SP C           254 cc     56 cc    2.180/1.625   Angle    Spread Port      58/107     HV 1813 / HV 1814
WP 18 SP C AP    266cc      57 cc   2.180/1.625  
Angle     Spread Port     58/107     HV 1813 / HV 1814

Cylinder Head Recommendations:

                                    CUBIC INCH          COMPRESSION         CAMSHAFT               RPM                                APPLICATION

WP 18 SP C*        358 - 430       13.5 Minimum         Roller        4000 - 7500        Oval Track / Drag Race
KC 18 SP C          358 - 430       13.5 Minimum         Roller        4000 - 7500        Oval Track / Drag Race
WP 18 SP C AP   358 - 430        13.5 Minimum         Roller        4000 - 7500       Oval Track / Drag Race

* The 18 SP C is available in several intake port sizes. Ask a BRODIX representative which size would best fit your application

Flow Chart CFM @ 28" H20

                              VALVE SIZE                0.200                0.300               0.400               0.500              0.600              0.700

 WP 18 SP C         2.180 INTAKE                157                    230                   280                   329                  360                   367
HUT 921.4 A        1.625 EXHAUST             112                    167                   209                   227                  238                   245
(CNC Ported)
KC 18 SP C          2.180 INTAKE                163                     232                   288                   335                  351                  360
(CNC Ported)       1.625 EXHAUST             119                     172                   214                   233                  242                  250
WP 18 SP C AP    2.180 INTAKE                154                     224                   278                   328                  369                  395
(CNC Ported)       1.625 EXHAUST             134                     175                   241                    261                 270                  274

BASIC EASY ORDER NUMBER:

• wp 18 sp c ap pkg spread port exhaust 1188105 MAKE OFFER PER 1

  • Layaway terms available

  • Free shipping in the lower 48 states!

  • We handle the complete BRODIX line.

  • We are open from 9:00 AM to 10:00 PM.

  • WE CAN BEAT ANY PRICE ON BRODIX.

CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

CONTACT US THE PRICE IS NEGOTIABLBEST OFFER

After purchasing, pay instantly with your credit card through PayPal!
 
VisaMasterCardDiscoverAmerican Express

Warning: May cause cancer and reproductive harm.