CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
The CNC ported 15 is one of the latest in a long line of heads designed by BRODIX
for the dirt late model market. This new creation features a 15 degree valve angle,
specially raised and shaped intake and exhaust ports, and a newly designed chamber
and spark plug angle that works well with any type of fuel. These new 15 degree heads
are available 100% CNC por ted in several different configurations.
Package Heads:
• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO BRODIX MG 1550 • PS Valve Job: COMPETITION VALVE JOB
• Intake Valves: 2.180 X 5.850 o.a.l. • Exhaust Valves: 1.625 X 5.850 o.a.l. • Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000,
240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT • Retainers: 1.550 10° TITANIUM - MA 2398BR
• Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: SHAFT SYSTEM REQUIRED • Valve Seals: 11/32 - US VS529V
FACTS AND RELATED COMPONENTS:
• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: BRODIX MG 1550
• Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403
• Exhaust Gaskets: SPREAD PORT - BRODIX MG 52464, COMETIC C5424 STANDARD - BRODIX MG 1506
• Head Studs: BRODIX SK HS 15C/18C AP (BRODIX ALUMINUM BLOCK) • Accessory Bolt Holes Are Drilled
• Spark Plug Starting Points: NGK R5671A-10 FOR ALCOHOL NGK R5671A-9 FOR RACING GAS
• Spring Pockets: 1.550 OUT OF THE BOX, NO LARGER OR DEEPER • Valve Angle: 15°
• Angle Milling: .0065 in PER cc • Flat Milling: .0055 in PER cc • Angle Machining: NOT AVAILABLE
• Pushrod Slots: 58/107 • Stud Girdle: NOT AVAILABLE • Rocker Arms: SHAFT SYSTEM WITH 58/107 SPACING, CHECK HEADS
FOR INTAKE OFFSET - T&D 2239, JESEL KPS 306114, CROWER 7417F • Lifters: .180 OFFSET • Pistons: SPECIAL 15°
• Pushrods: SPECIAL LENGTH • Intake Face Angle: 5°
Cylinder Head Specifications:
INTAKE PORT CHAMBER VOLUME VALVE SIZES INTAKE/EXHAUST PLUG ANGLE EXHAUST PATTERN VALVE CENTERLINE INTAKE MANIFOLD
WP 15 SP 267 cc 51 cc 2.180/1.625 Angle Spread Port 58/107 HV 1500 / HV 1501
WP 15 STD 267 cc 51 cc 2.180/1.625 Angle 18° Standard 58/107 HV 1500 / HV 1501
C ylinder head recommendations:
CUBIC INCH COMPRESSION CAMSHAFT RPM APPLICATION
WP 15 SP 358 - 430 13.5 Minimum Roller 4000 - 7500 Oval Track / Drag Race
WP 15 STD 358 - 430 13.5 Minimum Roller 4000 - 7500 Oval Track / Drag Race
Flow Chart CFM @ 28" H20
VALVE SIZE 0.200 0.300 0.400 0.500 0.600 0.700 0.800
WP 15 SP 2.180 INTAKE 156 225 275 327 358 362
(CNC Ported) 1.625 EXHAUST 111 164 223 245 254 259
WP 15 STD 2.180 INTAKE 156 225 275 327 358 362
(CNC Ported) 1.625 EXHAUST 111 164 223 245 254 259
BASIC EASY ORDER NUMBER:
WP 15 SP Pkg Spread Port Exhaust 1258100 MAKE OFFER PER 2
WP 15 STD Pkg Standard Exhaust 1258101 MAKE OFFER PER 2
-
No one sells BRODIX for less.
-
Free shipping 48 states
-
Layaway terms available
- We handle the complete BRODIX line.
- We are open from 9:00 AM to 10:00 PM.
CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER
| After purchasing, pay instantly with your credit card through PayPal! |
   
|
Warning: May cause cancer and reproductive harm.
