CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
*YOU WILL RECEIVE 7/16 ROCKER STUDS UNLESS YOU SPECIFY OTHERWISE.
FLO-TEK’S small block 200cc As Cast ported chamber cylinder head, designed by Jones Engineering, with 23 degree runners make impressive horsepower—power ideal for street-strip ready. Right out of the box, these heads deliver exceptional flow numbers.
The features for the FLO-TEK 200cc include state of the art casting, versatile 200 cc intake ports that are specifically designed for outstanding versatility, 64 cc combustion chamber. These are the most affordable high quality aluminum cylinder heads on the market. The FLO-TEK Performance Cylinder Heads series are a line of heads designed by Tri-State Cylinder Head for maximum out of-the-box horsepower. Standard features are aluminum alloy, phosphorous bronze valve guides, high nickel valve seats, ends milled and drilled for accessories, offered in solid and hydraulic. Great for 383, 350, or 400 Stroker.
FLO-TEK inspects each shipment of aluminum heads offered in Straight or Angle assuring the customer that they are receiving the best products for the money. 100% assembled in the USA!
VALVE SPRINGS:
HYDRAULIC ROLLER – Up to .650 Lift – CL 142# @1.80” OP 400# @1.15” • C/Bind 1.040” • Intake Valve: 2.02 + .100
Exhaust Valve: 1.600 + .100
SOLID ROLLER – Up to .650 Lift – CL 230# @1.90” OP 600# @1.25” • C/Bind 1.15” • Intake Valve: 2.02 + .200 (P11544JF)
Exhaust Valve: 1.600 + .200 (P11751JF)
| Head Bolt Torque | 50-65-80 Ft-Lb, 75 Ft-Lb on Bottom (Permatex#80631) |
| Rocker Stud Torque | 45 Ft-Lb |
| Intake Port Gasket | Fel Pro 1205 or Equivalent |
| Exhaust Port Gasket | Fel Pro 1404 or Equivalent |
| Head Gasket | 350/383 Fel Pro 1003, Cometic C5399 |
| Head Bolts & Studs | ARP134-3601, Manley 42313, ARP 134-4001 |
| Head Bolt Washers | Manley 42102 |
| Suggested Manifold | Performer RPM Air Gap, Weiand Street Warrior 8150 |
| Spark Plug Starting Range | NGKR5671A-7/4091 Hotter or Colder or Equivalent |
| Intake Port Volume | 200cc |
| Exhaust Port Volume | 78cc |
| Combustion Chambers | 69cc |
| Max Spring Pocket Diameter | 1.560” |
| Street Build Spring | 1.46” Single W/D |
| Hydraulic Roller Spring Kit | 1.46” Dual Spring -PSK618-1-10 |
| Solid Roller Spring Kit | 1.55” Dual Spring -PSK583-1-10 |
| Hydraulic Roller/Street Build Intake Valve | 2.02 + .100 |
| Hydraulic Roller/Street Build Exhaust Valve | 1.600 + .100 |
| Solid Roller Intake Valve | 2.02 + .200 (P11544JF) |
| Solid Roller Exhaust Valve | 1.600 + .200 (P11751JF) |
| Rocker Arms | 91511772SW |
| Push Rods | Hardened Push Rods |
| BASIC PACKAGE COMPONENTS: | |
|---|---|
| Retainers | SB – 7 Degree, HR/SR – 10 Degree Chrome Moly Retainer |
| Valve Locks | SB – 7 Degree, HR/SR – 10 Degree Chrome Moly Locks |
| Rocker Stud | SB – 3/8”, HR/SR – 7/16” Chrome Moly Rocker Stud |
| Guideplate | Hardened Steel Guideplate |
| Valve Seals | Viton Positive Seals |
| Spring Cup | Hardened Steel Cups |
| Intake Valve Seat | Powder Metal |
| Exhaust Valve Seat | Powder Metal |
| Bronze Valve Guides | Phosphor Bronze |
*You must specify STRAIGHT or ANGLE plug with order!
BARE
MAKE OFFER
STREET BUILD – Up to .550 Lift – CL 130# @ 1.75, OP 310# @ 1.20, C/Bind- 1.160 – Intake Valve: 2.02 + .100 Exhaust Valve: 1.600 + .100
MAKE OFFER
HYDRAULIC ROLLER – Up to .650 Lift – CL 142# @1.80” OP 400# @1.15” • C/Bind 1.040” • Intake Valve: 2.02 + .100
Exhaust Valve: 1.600 + .100
MAKE OFFER
SOLID ROLLER – Up to .650 Lift – CL 230# @1.90” OP 600# @1.25” • C/Bind 1.15” • Intake Valve: 2.02 + .200
Exhaust Valve: 1.600 + .200
MAKE OFFER
SHIPS IN THE LOWER 48 STATES FREE!
CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER
Warning: May cause cancer and reproductive harm.
