CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

The BRODIX Track 1 F series was designed for bolt-on horsepower, reliability, and weight loss. This head has become the cylinder head of choice in the Ford market for racers using the Windsor-style engine. It is available in many stages ranging from out-of-the-box bare castings to 100% CNC ported, assembled packages. The BRODIX Track 1 F comes standard with an exhaust port that has been raised .500”. The X exhaust that incorporates the “N” bolt pattern is available as an option, and the combustion chambers may be angle milled. BRODIX has the perfect head
for all applications with port sizes ranging from 195 cc to 225 cc.

Package Heads:

• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO FP 1262 (T1 F STD, STS T1 F STD 214)
MATCH INTAKE PORT TO FP 1262R (STS T1 F STD 225) • PS Valve Job: COMPETITION VALVE JOB
• Intake Valves: 2.055 X 4.920 o.a.l. - BR 60005 (T1 F STD) 2.080 X 4.965 o.a.l. - BR 81019 (T1 F STD)
2.100 X 4.965 o.a.l - BR 81011 (STS T1 F STD 214/225) • Exhaust Valves: 1.600 X 4.940 o.a.l. - BR 60001 (T1 F STD)
1.600 X 4.965 o.a.l.- BR 81021(T1 F STD,STS T1 F STD 214/225)• Valve Springs: 1.470 HYDRAULIC ROLLER VALVE SPRING -CC 987,
125 lb CLOSED, 325 lb OPEN, 1.900 INSTALLED HEIGHT, .575 MAXIMUM LIFT 1.550 FLAT TAPPET VALVE SPRING - BT 120121,
140 lb CLOSED, 400 lb OPEN, 1.950 INSTALLED HEIGHT, .600 MAXIMUM LIFT 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb
CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT • Retainers: 1.430 7° STEEL - CC 743
1.550 10° STEEL - CC 752 (T1 F STD) 1.550 10° TITANIUM - MA 2398BR (STS T1 F STD 214/225) • Valve Locks: 7°- PI PF-555
10° JUMBO - CC 611• Rocker Studs: 7/16 - BR 716L, AR RRS-4I•Guide Plates: 5/16 -BR 289351 - AVAILABLE EXCLUSIVELY FROM
BRODIX
• Valve Seals: 11/32 - US VS529V

Facts And Related Components:

• Torque Heads: 100 ft-lb WITH 1/2” STUDS 70 ft-lb WITH 7/16” STUDS• Torque Rocker Studs: 40-45 ft-lb
• Intake Gaskets: FEL-PRO 1262 (T1 F STD, STS T1 F STD 214) FEL-PRO 1262R (STS T1 F STD 225)
• Head Gaskets: FEL-PRO 1011-1 OR FEL-PRO 1011-2• Head Studs: ARP 154-4203• Head Bolts: ARP 154-3603
• Exhaust Gaskets: FEL-PRO 1487 OR BRODIX MG 1350 T1 F STD X EXHAUST USES BRODIX MG 1351 -
AVAILABLE EXCLUSIVELY FROM BRODIX
• Accessory Bolt Holes Are Drilled• Spark Plug Starting Points: CHAMPION RN12YC OR AUTOLITE 3924
FOR PUMP GAS NGK R5671A-8 FOR RACING GAS NGK R5671A-9 FOR ALCOHOL
• Spring Pockets: MAY NOT BE CUT ANY LARGER OR DEEPER THAN 1.550 • Valve Angle: 20°
• Angle Milling: .010 in PER cc• Flat Milling: .0060 in PER cc• Stud Girdle: 53/119, BR 6430 -AVAILABLE EXCLUSIVELY FROM
BRODIX
• Rocker Arms: FORD 7/16” ROLLER ROCKERS • Guide Plates: 5/16 - BR 289351 - AVAILABLE EXCLUSIVELY FROM
BRODIX • Lifters: STANDARD

Cylinder Head Specifications:

                                   INTAKE   CHAMBER VALVE SIZES       PLUG         EXHAUST          VALVE                   INTAKE 

                                     PORT      VOLUME        INT./EXH.         ANGLE        PATTERN   CENTERLINE          MANIFOLD

T1 F STD                   195 cc          68 cc         2.080/1.600          Angle          Standard           53/119          Small Block Ford
T1 F STD X               195 cc          68 cc         2.080/1.600          Angle          “N” Style           53/119          Small Block Ford
STS T1 F STD 214  214 cc          68 cc         2.080/1.600          Angle          Standard           53/119          Small Block Ford
STS T1 F STD 225  225 cc          68 cc         2.100/1.600          Angle          Standard           53/119          Small Block Ford

Cylinder Head Recommendations:

              CUBIC INCH  COMPRESSION                    CAMSHAFT                            RPM                        APPLICATION

T1 F STD                  302 - 408 11.5 Min. Hyd. Roller/Flat Tappet/Roller 3500 - 7000 Oval Track/Drag Race/Pro Street
STS T1 F STD 214 302 - 421 11.5 Min. Hyd. Roller/Flat Tappet/Roller 3500 - 7500 Oval Track/Drag Race/Pro Street
STS T1 F STD 225 302 - 440 11.5 Min. Hyd. Roller/Flat Tappet/Roller 3500 - 8000 Oval Track/Drag Race/Pro Street 

Flow Chart CFM @ 28" H20

                                        VALVE SIZE    0.200             0.300             0.400            0.500            0.600            0.650            0.700

T1 F STD                    2.080 INTAKE      124                172                212                241               255                260               261
                                     1.600 EXHAUST  100                129                153                166               176                179               180
T1 F STD X                2.080 INTAKE      124                172                 212               241               255                260               261
                                     1.600 EXHAUST  100                134                164                184               195                200               203
STS T1 F STD 214   2.080 INTAKE      141                 211                265               298               320                323               326
(CNC Ported)           1.600 EXHAUST  119                 161                190                203               213                216               221
STS T1 F STD 225  2.100 INTAKE       147                 215                262               303                324               333               334
(CNC Ported)           1.600 EXHAUST  119                 161                190                203               213                216               221

Basic easy order numbers:

• STS T1 F STD 214 Bare 68 Chamber 1068001 MAKE OFFER PER 2

• STS T1 F STD 225 Bare 68 Chamber 1068002 MAKE OFFER PER 2

CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS. 

CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER

After purchasing, pay instantly with your credit card through PayPal!