CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
With the introduction of the new KC 13, BRODIX adds yet another weapon to its arsenal of
cutting edge cylinder heads. Due to the use of our unique “Total Control” process, the KC
13 is unmatched in both quality and performance. It utilizes a 13° valve angle, moved valve
centerlines, and a 47 cc wet flow friendly combustion chamber. This 100% CNC ported offering
from BRODIX is destined to become the industry standard.
Package Heads:
• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO BRODIX MG 1600 (TRIM TO FIT), MR. GASKET 143
• PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.180 X 5.550 o.a.l. (50° SEAT ANGLE) • Exhaust Valves: 1.625 X 5.550 o.a.l. (45° SEAT ANGLE)
• Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT• Retainers: 1.550 10° TITANIUM - MA 2398BR
• Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: SHAFT SYSTEM REQUIRED • Valve Seals: 11/32 - US VS529V
Facts And Related Components:
• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: BRODIX MG 1600 (TRIM TO FIT), MR. GASKET 143 • Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403 • Exhaust Gaskets: FEL-PRO
1407 • Head Studs: SK HSSB 13 (ALUMINUM BLOCK) • Accessory Bolt Holes Are Drilled • Spark Plug Starting Points: NGK R5671A-10 FOR ALCOHOL
NGK R5671A-9 FOR RACING GAS • Spring Pockets: 1.550 OUT OF THE BOX, MAY BE CUT TO 1.625 - NO LARGER OR DEEPER • Valve Angle: 13° • Angle Milling: .0065 in PER cc
• Flat Milling: .0055 in PER cc • Angle Machining: NOT AVAILABLE • Pushrod Slots: 85/134 • Stud Girdle: NOT AVAILABLE • Rocker Arms: SHAFT SYSTEM WITH 85/134 SPACING, CHECK HEADS
FOR INTAKE OFFSET - T&D 2126, JESEL KPS 32342 • Lifters: .180 OFFSET • Pistons: SPECIAL 13° • Pushrods: SPECIAL LENGTH • Intake Face Angle: 5°
Cylinder Head Specifications:
INTAKE PORT CHAMBER VOLUME VALVE SIZES INTAKE/EXHAUST EXHAUST PATTERN VALVE CENTERLINE INTAKE MANIFOLDKC 13 STD 283 cc 47 cc 2.180 /1.625 Angle 18° Standard 85/134 Edelbrock 2955/Edelbrock 2958
Cylinder Head Recommendations:
CUBIC INCH COMPRESSION CAMSHAFT RPM APPLICATION
KC 13 STD 358 - 430 13.5 Minimum Roller 4000 - 7500 Oval Track / Drag Race
Flow Chart CFM @ 28" H20VALVE SIZE 0.200 0.300 0.400 0.500 0.600 0.700 0.800
KC 13 STD 2.180 X 50° INTAKE 159 239 307 352 359 364 370
(CNC Ported) 1.625 X 45° EXHAUST 113 164 213 236 247 258 263
BASIC EASY ORDER NUMBER:
• KC 13 STD Pkg Standard Exhaust 1238102 MAKE OFFER PER 2
-
Layaway terms available
-
Free shipping in the lower 48 states!
-
We handle the complete BRODIX line.
-
We are open from 9:00 AM to 10:00 PM.
-
WE CAN BEAT ANY PRICE ON BRODIX.
CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.
CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER
After purchasing, pay instantly with your credit card through PayPal! |
Warning: May cause cancer and reproductive harm.